Lenovo Smart Clock Essential Cover
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This alarm clock is still a bit too bright on the lowest brightness setting. This still keeps the buttons accessible.
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 34
- Makes
- 1
- Views
- 753
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Bedroom
- License
- Creative Commons — Attribution — Share Alike
03/10/2023 - Added a blank version with the microphone holes, as well as a STEP file for adding your own logo if you like!
This is a much more elegant solution than putting a cloth on top or piling books in front of the clock to reduce the glow. It sits nicely without the need of a clamping mechanism due to the angle of the clock face. Designed in Fusion 360. I drilled the two holes by hand after printing to allow more sound to the microphones but it works fine without the holes.
Material: CF PETG but works with anything really.
Layer Height: 0.2mm
Infill: 100% to ensure no light passes through
Orientation: I printed it with the Z's facing up for a better surface finish but you can save material by printing the Z's facing down.