Sofa Table
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.73 – €0.90 net (excluding VAT)
For file: Partition Wall 2.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.81 excluding VAT (range midpoint).
- Weight reported by the author
- 8 g
- Print time reported by the author
- 55.2 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
The Sofa Table is designed for daly use and TV evenings.
- Rating
- 5 / 5
- Likes
- 25
- Downloads
- 25
- Makes
- 0
- Views
- 391
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Living Room
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This cool Sofa Table is super practical because you don't need glue and no screws just a 3d printer
Print the Base and the Table legs with 95A TPU and the rest with PLA PETG or other material.
If you want to adjust the height of the Sofa Table then it is quite simple because a table leg is 10 cm long if you now wantto have table that is 50 cm long then you have to print 5 table legs and so on and so on
Size | Length | Width | Height |
|---|---|---|---|
Base | 15 cm | 10cm | 1,8 cm |
Table legs | 4cm | 2cm | 10cm |
table box | 20cm | 15cm | 5cm |
It may be that sometimes the thread clamps but that's no problem. I made a special instruction for this
you need olive oil or other oils the main thing is oil. and sandpaper
Step one
grind the threads carefully until they can be easily screwed into each other
Step two
Now brush the threads with oil
