Electrical Toothbrush Holder with Storage
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Holder for Oral-b El. toothbrush charger and small storage for brushes and the cable. Prevents soiling of the cabinet.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 10
- Makes
- 0
- Views
- 106
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Bathroom
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Our family uses Electrical Toothbrushes. A disadvantage is that it can relatively easy be tipped over by accident when standing in the charger. And there is almost always some residues of toothpaste water that runs down from the brush on the charger. And further down on the cabinet when it runs over the edge of the charger, resulting in soiling and potentially water damages on the cabinet surface.
The cable to the charger is also in the way a lot of the time and gets tangled.
So I made a holding plate where the charger can be snapped into place. It also has two small storage containers, where replacement brushes and the cable can be stored. The containers are also placed so the cable to the charger is fixed between them. The charger is put in place by placing one edge first against the holder "wings" and then pressing the other edge down until it snaps into place against the other "wing".
I printed this in White Buddy3D PLA with a 0,6 mm Nozzle on my Flashforge Adventurer 4.