Rolleicord V (1955) Cold Shoe
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
The Rolleicord V (1955) is a great companion and I use it often, but it lacks a cold shoe that can hold a light meter…
- Rating
- 0 / 5
- Likes
- 13
- Downloads
- 71
- Makes
- 0
- Views
- 1,528
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Photo & Video
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
The Rolleicord V (1955) is a great companion and I use it often, but it lacks a cold shoe that can hold a light meter or a small flash. This became quite evident when the Reveni Labs light meter arrived, so I made one suitable to hold the Reveni Labs light meter but also my old Voigtländer VCII meter.
Do you like it? Please consider to buy me a cup cup of coffee. Thank you!
The parts are named as follows:
RCS part 1.stl - this will have contact with the camera leather and make sure the cold shoe stays in place.
RCS part 1 alt.stl - This alternative part will not touch the camera leather but may be a bit wobbly on one axis.
RCS part 2.stl
RCS part 3 Reveni.stl - use this one if you have the Reveni meter. It will have a nice fit.
RCS part 3 VCII.stl - use this one if you have the Voigtländer meter or if you want to use a small flash
Additional parts needed:
Flat head M3 screw, 4 mm long, e.g. a computer screw https://www.inet.se/produkt/4301308/skruv-for-harddisk-20-pack?gclid=CjwKCAjwm_P5BRAhEiwAwRzSOzMHU-HgVJ22d1chPJwN4CPkcZpYjLig7FTxXSNvB7NPm9o0kazQuhoCbAcQAvD_BwE
NOTE
There are variations of the strap lugs so please let me know how it fits your TLR camera.
Print Settings
Printer Brand: MK3
Printer: Prusa i3
Rafts: Doesn't Matter
Supports: Yes
Resolution: 0.2
Infill: 10%
Filament: Clas Ohlsson PETG black
Notes:
Support on build plate only, when necessary.
Category: Camera