1 / 6
Metallica Lamp
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Metallica lamp with LEDs, 12V
- Rating
- 5 / 5
- Likes
- 304
- Downloads
- 993
- Makes
- 11
- Views
- 5,471
- Reviews
- 10
Updated at source:
Model information
- Source
- Printables
- Category
- Home Decor
- License
- Creative Commons — Attribution
The design has three parts:
- Case, printed in PETG black 0,3mm, 20% infill
- Inlay, printed in PETG red translucent, 0,15mm 100% infill
- Cover, printed in PETG black 0,3mm, 20% infill
Additional parts:
- 3x wood screw 3x10mm
- 1x DC plug 8mm Diameter
- 50 cm Led strip
- some hot glue
Assembly
Print the parts, place the inlay in the case and fix it with some hot glue at the edges.
Place the LED strip in the V shaped slots of the cover, do not use the adhesive tape of the strip. The strip is clamped by the slot. Place the DC plug and fix it with some hot glue.
Wire up everything, place the cover on the back of the case and place the 3 screws.
Please post your make!