Oral-B (Brawn) Electric Toothbrush horizontal holder
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
To place the toothbrush in the washbasin table.
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 22
- Makes
- 0
- Views
- 92
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Bathroom
- License
- Creative Commons — Attribution — Share Alike
1.- Introduction
As with all prints I do, all start or from a need, a fix or a lust-to-have.
Long ago (Few years ago) I posted a model for a toothbrush stand here in Printables. Now comes the second edition, which is a horizontal holder which allows to dray before it is placed on the vertical holder.
Explore my other Printables: https://www.printables.com/@rbid/models
2.- Printing the Model
Need to print in the orientation as in the picture below with organic supports due to overhangs.
I opted to print it using PLA, because that is what was loaded on the printer.
Printer | Prusa MINI+. |
File |
|
Print Time | 38min. |
Filament used | 2.70mt (8.05gr) Dark Blue or Beige eSUN PLA. |
Layer height | 0.2mm. |
Printer Nozzle | 0.4mm. |
Perimeters | 3 |
I have upload the GCODE file for a Prusa Mini+ as well.
Feel free to use the one that suits you best.
3.- Other related designs I have:
4.- Change Log:
Upload: 2026-04-13: Initial Version.
5.- Last Words
Please don't forget to ★ Rate and ❤ Like
Post your Makes to earn Prusameters!
Do not hesitate to ask questions, feedback is essential to making better models.
You are kindly invited to follow me to get updated when upload new models.
Happy printing & Greetings from the Galilee.
Hope it was not TL;DR