Modular Gothic Castle Trellis Tower for Climbing Plants

Give your climbing plants a royal home! This modular, Gothic-inspired trellis tower is perfect for vines, ivy, pothos, or any creeping houseplant. Unlike boring standard plant supports, this tower acts as a beautiful piece of decor. The elegant arched windows give your plants plenty of room to weave through and grab onto.

Key Features:

• Modular Design: The tower can grow with your plant! Just print as many middle sections as you need to reach the desired height.

• Gothic Aesthetic: Intricate castle-like arches and a spiked roof cap make your plant pot look like a scene from a fantasy novel.

• Easy Assembly: The sections connect using small, printed pegs (pins).

  • Option 1: Just press-fit them together so you can easily add more sections later.

  • Option 2: Use a drop of CA glue (Superglue) on the pegs for a permanent, rigid structure.

Print Instructions

• Material: PETG is highly recommended (since it will be in contact with moist soil and potentially sunlight). PLA is fine for strictly indoor use.

• ⚠ CRITICAL PETG SETTING: To get the cleanest outer surface and sharp gothic details, limit your Outer Wall Acceleration to 1000 mm/s². High speeds on the outer shell might cause ringing or messy overhangs.

• Nozzle: 0.4 mm.

• Layer Height: 0.2 mm.

• Infill: 10-15%.

• Supports: The gothic arches are designed with more than 45-degree angles to print Support-Free on most modern printers! (You might need a tiny brim for the small connection pegs, just so they don't get knocked over).