1 / 2
M12x1.25 adapter for Th8s Shifter.
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a M12x1.25 ish adapter for the Thrustmaster Th8s Shifter to add an aftermarket Shifter Handle.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 11
- Makes
- 0
- Views
- 71
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Public Domain
All the adapters i found did not fit the shifter, So i made my own. This one is tight tolerance, May need to adjust the hole diameters for yourself. My shifter shaft is 7mmx9mm shaved circle with screw hole on top. The Shifter i made this for close to an m12x1.25 size and pitch. I made this is TinkerCad. Printed in Pla. I had to press fit it onto the shaft, was tight enough that it isn't coming off even without the screw. There is no play in the Shift handle.