1 / 4
Land Rover Discovery 1 Rear Lettering — image 1
1 / 4

Land Rover Discovery 1 Rear Lettering

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

The "DISCOVERY" lettering for the left hand side of the rear hatch and "Tdi" lettering for the right hand side.

Rating
0 / 5
Likes
7
Downloads
44
Makes
0
Views
141
Reviews
0

Updated at source:

Model information

Category
Automotive
License
Creative Commons — Attribution

Some chunky lettering for the rear hatch of my Discovery 1 300Tdi. They may apply to other models and engines.

Printing
Print flat . I've supplied the DISCOVERY as two models "DISCO" and "VERY" so it'll fit smaller build plates without rotating. You don't need supports. My models are all 5mm thick. If you want to change the thickness, just scale in the Z-axis in your slicer.

Material & Paint
You will want to smoothen then spray these with primer and paint to seal and make them shine. My example prints are made with grey PETG and unfinished.

Location
You should be able to eyeball the location for these and I've provided photos to show how the original lettering sits on my car.  When correctly spaced, the DISCOVERY lettering is 350mm wide and the Tdi is about 85mm wide. Most of the letters are 30mm tall, although the "S" "C" and "O" are 32mm tall and should be aligned with the top of the shorter letters.

Tags