12" Signal Housing Serrated Mounting Boss Profile
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Reference serrated boss profile for 12" North American signal housings.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 5
- Makes
- 0
- Views
- 28
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Mechanical Parts
- License
- Creative Commons — Attribution — Share Alike
I own McCain and TCT brand 12" signal housings and I wanted to be able to 3D print a variety of brackets to mount and position them, but that requires overcoming the serrated-tooth pattern on the 2" ID mounting holes that seem to come on every North American signal housing. The serration is useful to prevent the housing from rotating unintentionally. This STL provides a useful reference that has been tested to fit reasonably well on the aforementioned housing models, at least at FDM-level precision. I have not tested this pattern for complete water-tightness, but it has proven to keep out rain over the last few years I've had a housing out in the elements, with light pressure applied from a carriage bolt holding my print in compression.
This profile was reverse engineered with only calipers and trial-and-error, but if it is useful to anyone:
2" ID
2.469" OD (But fairly certain the width of the serration varies wildly between housing brands, this is based on a very conservative width assumption)
0.049" tooth height
0.107" between valleys
0.091-0.092" between teeth plateaus
0.016" plateau width