Xiaomi Mijia temperature sensor wall mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A simple wall mount for Xiaomi Mijia BLE temperature/humidity sensor
- Rating
- 5 / 5
- Likes
- 44
- Downloads
- 302
- Makes
- 8
- Views
- 1,559
- Reviews
- 8
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Share Alike
A really simple wall mount for the "square" Xiaomi Mijia BLE temperature/humidity sensor (LYWSD03MMC).
Depending on your printer, you might have to adjust the size a bit. For our Mk3S I created the model with 0.2 mm clearances on each side, to help installing and removing the sensor.
There's also a continuous gap on top of the mount to allow air freely move around the sensor - and also to help removing the device from the mount, using for example a flat-headed screwdriver or some other similar object.
I tried to print the model with some generic PETG with not-so-great success, especially if you're finicky about the looks. PLA worked much better, although I must say also Prusament PETG was very tolerable. :)
One small tip for slicing: at least I personally wanted to have the layer seam on the bottom of the case, so I used seam painting tool to achieve that.