Parsons Table Leg Bracket
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I don't have an Ikea around, so I ordered some Parsons tables from Amazon and needed some brackets to stack them. This…
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 23
- Makes
- 0
- Views
- 260
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution
I don't have an Ikea around, so I ordered some Parsons tables from Amazon and needed some brackets to stack them. This bracket has guides integrated to align it and hold it in place while you fasten it. I only put the guides on 1 side so you wouldn't need supports, and so you could install it with the legs already in place.
I used a 0.6mm nozzle to speed up the print time.
Those holes in the picture are from me testing different pilot hole sizes for the table. A 3/32" hole is as big as I would go, anything bigger and I was stripping screws too easily.
Hardware required:
'#10 x 3/4" Wood Screws
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
Rafts:
No
Supports:
No
Resolution:
0.2 mm
Infill:
30%
Filament: Doesn't matter PETG
Category: 3D Printing