Refined Lever for Engineer SS-02 Solder Sucker
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A lever to actuate the solder sucker from a more comfortable position
- Rating
- 5 / 5
- Likes
- 3
- Downloads
- 17
- Makes
- 1
- Views
- 120
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I liked Shiro321's idea but wanted to make some changes so I designed my own version.
This design uses an M3 nylon lock nut and a M3x20 socket head cap screw.
There are two versions of the clamp. Best bet is to start with the normal tolerances and if the arm feels too loose for you then print the tighter tolerance version
One with normal tolerances: Clamp-V9-Normal-Tolerances
One with tighter tolerances: Clamp-V10-Tighter-Tolerances
I only tested in ASA with a 0.4mm nozzle so other filaments/nozzles may need some tolerance changes.
Print with the top face on the build plate for no supports. See the slicer picture.
If you want to make any changes I included the STEP files and here is a link to the Onshape document