1 / 1
Delta 31-255X Drum Sander Thickness Adjustment Replacement Gears
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Replacement Gears for the Delta 31-255X Drum Sander's Thickness Adjustment, using original mounting hardware.
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 21
- Makes
- 0
- Views
- 68
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
These gears replace the standard plastic ones on the Delta 31-255X Drum Sander, for its thickness adjustment platform. These are designed with the original mounting hardware in mind, and have been test printed on the Prusa Core One successfully.
Material: ABS or PCCF (Have tested with PETG, unsure of long term strength)
Infill: 100% (for stregnth)
Recommended Layer Height: 0.2
Support Material Needed
Each of the gears print best with the large face down (see attached photo), use support material.