lampshade IKEA
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model information
- Source
- Printables
- Category
- Office
- License
- Creative Commons — Attribution — Noncommercial
Ceiling lampshede for IKEA ceiling cable HAVSDJUP
I did reconstruction of my office and all the time- ceiling cables stayed unfinished - without any touch or personalization - but not any more.
I created this basic lampshades inspired by golden ratio spiral that fit PRUSA MINI bed size (yep, i got one)
Printed in VASE mode - i used 0.4mm nozzle (i lost my wider one- otherwise i would go 0.8mm)
I share my print settings for white PLA - feel free to adjust it and i strongly recommend to use bigger nozzle size
Category | Setting | Default settings | My settings |
|---|---|---|---|
Filament | Extrusion multiplier | 1 | 1.1 |
Temperature | Nozzle temperature | 205 | 210 |
Retraction | Retraction Length | N/A | 0 |
Cooling | Fan Max | 100 | 80 |
Cooling | Fan Min | 100 | 80 |
Extrusion width | External perimeters | 0.42 | 0.6 |
Extrusion width | Perimeters | 0.44 | 0.6 |
Overlap | Infill/perimeters overlap | 23% | 35% |
Speed | External perimeters | 25 | 15 |
Speed | Small perimeters | 25 | 15 |
Infill | Fill density | 15% | 0% |
Vertical shells | Perimeters | 3 | 1 |
Vertical shells | Spiral vase | false | true |
Horizontal shells | Top solid layers | 5 | 0 |