Thrustmaster T300RS Pulley bearing mod
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€2.69 – €3.28 net (excluding VAT)
For file: Poulie_0.4n_0.15mm_PLA_MK4_3h31m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €2.99 excluding VAT (range midpoint).
- Weight reported by the author
- 26 g
- Print time reported by the author
- 3.53 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
This is a 3d printed pulley for the T300RS which can house 2 bearings. A custom machined shaft is required.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 8
- Makes
- 0
- Views
- 95
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Video Games
- License
- Creative Commons — Attribution — Noncommercial
3D printed custom pulley for the Thrustlaster T300RS wheel. Since the outside diameter of the original shaft isn't compatible with standardized beartings, i decided to design a custom one.
2 Bearings are needed :
-1x626 (19x6x6 mm)
-1x696 (15x6x5 mm)
Part to be 3d printed :
-Pulley
3d printing parameters :
Filament : PETG (i used prusament's grey PETG)
5 walls, 30% infill
Part to be machined :
Shaft (Technical drawing and .STEP file available)
Pictures are coming, i just have to disassmeble my wheel.