1 / 9
Bodies and wings for the Robak 2 RC Car — image 1
1 / 9

Bodies and wings for the Robak 2 RC Car

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Alternative bodies for the race body mounting system plus wings

Rating
0 / 5
Likes
14
Downloads
91
Makes
0
Views
483
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — Share Alike

Notes

The pictures were taken over the course of almost a year, so the actual files may differ from the designs shown. The red/white and purple/white cars are the most recent versions.

These bodies require proper cable management, as there is very limited space underneath.

I always had a bent clip when using the rear body post, so I redesigned it. This version is compatible with the original race body.

The studs should be printed using a stiff material. All other wing components must be printed in TPU.

The bodies require supports in the rear. Additional supports may be necessary when printing in TPU.

The window tiles are optional and can simply be glued onto the body.

Printing wingB also requires supports. I generally recommend using wingA, as it is easier to print and provides more clearance on both sides between the wheels. It is also less prone to splitting in a crash due to the printing orientation.

The wing parts can be used independently. The bodies require parts from the Race body design.

The wingA design was originally based on an Arrma Typhon wing from Printables, which has since been removed. This note is included to provide proper credit.

Print settings

  • Walls: 3

  • Infill: 10% gyroid

Hardware 

Part

Size

Qty

Comment

FHCS

M3x16-18mm 

2

to attach the wing to the wing mount

SHCS

M3x40mm

2

to attach the wing mount to the diffcase

Square nut

M3

2

to attach the wing to the wing mount

Instructions wing

  1. Press the studs into the wing mount with the short side of the lip going in first

  2. Remove the the screws holding in the rear shock tower from the car

  3. Press the wing mount into the holes for the previously removed screws

  4. Fasten the shock tower to the diffcase using the two SHCS M3x40mm

  5. Attach the wing to the wing mount

"Happy printing, and God bless, my friend."
— Bob Ross