Battery Tender Motorcycle Mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Clip to mount a SAE battery charging connector to a motorcycle frame tube
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 14
- Makes
- 0
- Views
- 190
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Clip to mount a standard SAE battery charging plug (such as the ones used on Battery Tenders) to a motorcycle frame tube. Designed to fit the subframe of my Yamaha FZ-07/MT-07, but it should fit any 1"/25cm frame tube.
UPDATE: added a version to fit 7/8"/22mm frame tubes
Use one or two zip ties to secure the clip to the frame tube (two zip tie mounting holes are included in the model, but I find that one zip tie is sufficient). The clip should be tight enough to provide a secure friction fit on the SAE connector, but you can run a zip tie through one of the holes to secure the SAE connector if you desire.
Prints fine with no supports, but helps to check that bridging is set to span the zip tie holes in the short direction.