Steyr L9-A1 A2 MF Steyr 9mm magazine conversion
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Spring plate and magazine cap to convert the Steyr A2 MF Steyr 9mm magazine for use in the L9-A1 pistols.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 16
- Makes
- 0
- Views
- 117
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution — Noncommercial
I was looking for another magazine for a Steyr L9-A1 and was unable to find one available. I decided the available Steyr A2 MF 9mm magazine could be most likely converted to fit. I then created a spring plate and magazine cap to convert the Steyr A2 MF 9mm magazine for use in the L9-A1 pistol.
The parts had to be made a bit thicker since most plastics are not as strong as the original metal components so there is a std depth cap and a deep cap to keep the capacity. The cap locking method provides retention via the sides of the spring plate and a pin/hole configuration like the A2.
The contour of the cap is reasonably close to the original and should provide the finger grip surface for removal when needed.
Printing: I used 5 for walls, top and bottom. Infill 20% gyroid. The A2 spring plate needed support added when printing since the button on the bottom lifted the entire print off the plate by a few mm when printing standing up.
PLA is working for prototyping and may not be able to hold up for long term use since PLA will bend if left under pressure.
ASA was used for the final parts and is working well.
Additional files included are a creation of the original A1 magazine spring plate and cap if you need to replace one or want to change color etc.
Should you find any issues please use good judgment on continued use of the model files.