Simple Shaker XL
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A Shaker made of 4 easy to print parts that holds 500g/1.1lb of salt. With small holes. large holes and a pouring hole.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 8
- Makes
- 0
- Views
- 23
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
SIMPLE SHAKER XL
A shaker for salt, pepper, MSG, herb mixtures and other things that can hold 500g / 1.1lb of salt. Printable without supports. Allows for closing and also offers small holes (2mm diameter), large holes (3.5mm diameter) and a pouring opening. I printed mine in ASA but it should work fine in PLA and PETG too.
How to:
1) Print the parts in your preferred material and settings adequate for your printer.
2) Press the selector into the top cover part. Make sure the little handle points up (through the open "ring").
3) Screw the part with the holes onto the base container.
4) Then screw on the top cover + selector. If the selector is stuck or hard to move, unscrew the top part just a little.
5) Optional step: Coat the inside in food-safe varnish.
6) Fill with salt, pepper, herbs etc and enjoy.