ZealSound K66 Microphone Boom Arm Bracket
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
U-bracket to attach the ZealSound K66 microphone to any standard boom mic arm using the 3/8 inch bolt.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 24
- Makes
- 0
- Views
- 106
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Audio
- License
- Creative Commons — Attribution
U-bracket to attach the ZealSound K66 microphone to any standard boom mic arm using the 3/8 inch bolt/adapter.
This bracket has a recess for a 3/8 inch nut (15mm x 8.5mm), and uses the original holder screws for the microphone.
ASA/ABS recommended (with proper shrink parameters adjusted) or PETG.
0.4mm nozzle, first layer height 0.24, other layer height 0.2mm.
3 wall loops, 15% infill (Gyroid or Locked Zag). No supports.
I printed mine in ASA on a PETG raft (Ender 3 V2, unheated enclosure), using custom g-code to separate the first three layers for the PETG raft (primitive shape at 0.64 height, followed by the main model, Z height 0.74mm), 60 deg bed, going from 240 deg nozzle temp for PETG to 250 nozzle temp for ASA.