4-way soft vice jaws for 1" 1/8 fork pivot
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Soft vice jaws for 1" 1/8 fork pivot Magnetic, insert Ø10mm x 5mm thick magnets Print a normal one and a mirrored one.
- Rating
- 5 / 5
- Likes
- 4
- Downloads
- 32
- Makes
- 1
- Views
- 161
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Soft jaws I made for holding 1" 1/8 fork pivot. It's magnetic, using Ø10 mm * 5 mm magnets. Make sure before inserting the magnets that the 2 parts would stick together like in the picture, it's much easier for storage and once it's inserted you can't take the magnet back out without destroying the part. Very fidgetty actually.
4 ways to hold the pivot: horizontal, vertical, 45° or 15 degrees from vertical.
I printed it in PETG, 0.4mm, it's all walls. Due to the shape it will want to warp, print accordingly.
Works great.