IBS Rar Dag, a Destiny Class 240-ton yacht (Traveller RPG)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A 3d-printable Traveller spaceship found on the blog listed in the description.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 17
- Makes
- 0
- Views
- 76
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Vehicles & Machines
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a model of a spaceship for the role-playing game Traveller, ideally Mongoose 2nd edition. The original design of the ship is at https://travellerrpgblog.blogspot.com/2016/08/deck-plans-starship-200-ton-ish-yacht.html, and was created by Robert of YetAnotherTravBlog. All Traveller-related material is copyrighted by Mongoose Publishing.
NOW, that said, behold, this SUPER COOL SHIP. Robert did one hell of a job on this ship, and it just looks so damn cool. Robert was kind enough to provide me with the sketchup designs of the ship, and I ran them through meshmixer and some other tools (I really should have taken better notes), and finally ended up simplifying the landing gear just a bit -- unless you're printing it REALLY REALLY big, there just isn't enough plastic to get the landing gear covers to survive printing in FDM. Be sure to repair the model with your copy of orcaslicer -- it was the only thing I could get to actually solve the last few non-manifold edges. Now, if you DO have a REALLY REALLY big printer, go for it. I'd love to see a 1m version of this, but i don't have a printer capable of that. yet.
The attached 3MF file is suitable for printing on your bambu. Unless you're printing bigger than I printed, those little covers on either side of the landing gear are going to come off with supports. I printed at really, really thin layers -- 0.08 extra-fine with about 65% infill for strength. It's still touch-and-go with the antenna, and those could be beefed up, but remember, the original model shows them as retractable, so you don't REALLY need them at all.
I've uploaded photos of this in white, an SLA print of it from my buddy Tim, and then the full-color print i ran. The photos labeled as Rar Dag are done in 0.08 extra-fine, and that reduced the color bleed-through a bit. at just over 4" in length, it's a slow, expensive print -- I used up dang near a kilo of filament with all the color changes and it took 40 hours or so. I filled the poopchute on the bambu at least 3 times.
Robert's original design has yellow for an accent color, but for our game, I chose the last of my atomic filament's Amethyst Violet Gemstone -- which turned out quite, quite well.
RPG stuff:
This is one devil of personal yacht -- jump-2 and 4g accel which is enough to outrun anything shy of an actual warship. It has some rather good crew quarters, and at least in the incarnation of the IBS Rar Dag (Imperial Business Ship), it's got a few surprises for the unwary. It's still a license to lose money, however, so only the idle wealthy can really afford to run on a vessel like this.