1 / 5
Simple armrest table with remote holder
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a simple armrest table which can be assembled with or without remote holder
- Rating
- 0 / 5
- Likes
- 12
- Downloads
- 30
- Makes
- 0
- Views
- 210
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Living Room
- License
- Creative Commons — Attribution — Share Alike
It was designed to fit 120mm wide armrests but step files are available.
Printing
Table - x2 with supports
Leg - x2, shoul be printed on the side
Balcony - x2, one mirrored
Pin (optional) - x2
Assembly
All parts can be just glued together, but for stability you can add heatset inserts and M3 bolts.
Also you can print 2 hexagonal pins and connect table pieces together.
Optional hardware:
Voron spec heatset inserts M3x5x4 - x6
M3x6 BHCS - x6