TP-Link AX3000 WiFi Router Mast Mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
TP-Link AX3000 WiFi Router Pole/Mast/Broomstick Mount that utilizes the mounting slots on the bottom of the router
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 5
- Makes
- 0
- Views
- 80
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial
This is rather esoteric but, I needed a TP-Link AX3000 WiFi Router Pole/Mast/Broomstick Mount that utilized the mounting slots (121mm apart) on the bottom of the router. I used a cut-off broomstick handle that was approximately 30 mm in diameter for the size of the mast hole (29.5 mm). Maybe this design will inspire someone else's model.
NOTE: You will need 2 wood or sheet metal screws whose heads fit into the router mounting slots to complete the installation. The screw holes in the mast mount are 3 mm in diameter and 10 mm deep. I used 2 matching screws out of a bin of extras so I'm not exactly sure of the screw size.
Filament: ELEGOO PLA-CF
Layer height: 0.2 mm
Infill: 15%