Shaker Incubator mounting rack for microtiter or deepwell plates
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Modular 3D-printable plate holder (MTP/DWP) for 1" (2.54 cm) shaker incubator grids; stackable with M5 rod.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 2
- Makes
- 0
- Views
- 79
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Chemistry & Biology
- License
- Creative Commons — Public Domain
This is a modular, 3D‑printable plate holder for shaker incubators that use a standard 1” (2.54 cm) hole grid mounting pattern. The design was tested on the Innova 44, which uses this grid.
1) Select a model set
2x1 set: holds 2 plates per level
2x2 set: holds 4 plates per level
The 2x2 design fits on a 10×10 hole footprint and can be stacked to hold 4, 8, and possibly even 12 plates total (depending on rod length, spacer count, and incubator clearance).
2) Print the parts
Print the spacer with supports.
The oval holes do not need supports.
3) Buy hardware
M5 threaded rod (choose a length long enough for the number of stacked levels)
Nut: M5 × 12 mm
Brass inserts
M4 screws (typically M4 × 8)
4) Assemble
Use 4× M4 screws per base plate.
To add more levels, print additional spacers and use a long enough M5 threaded rod for the full stack.