1 / 5
Plesiosaur - Articulated Print-in-Place – No Supports Needed — image 1
1 / 5

Plesiosaur - Articulated Print-in-Place – No Supports Needed

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

⚠ Full access to ALL FlexiMania designs with a commercial license 👉 patreon.com/c/FlexiMania_

Rating
5 / 5
Likes
27
Downloads
179
Makes
1
Views
400
Reviews
1

Updated at source:

Model information

Category
Animals
License
Creative Commons — Attribution — Noncommercial — NoDerivatives

A unique FlexiMania sea reptile inspired by the iconic long-necked plesiosaur.
This articulated print-in-place model features a flowing body, extended neck and smooth flexi movement straight off the build plate.
Perfect as a desk toy, prehistoric collectible or standout ocean creature.

🔥 Features
* Fully articulated plesiosaur
* Long flexible neck and body
* Print-in-place, one-piece model
* Smooth wave-like motion
* Optimized for FDM 3D printing
* No supports needed
* Beginner friendly
* Clean articulation and durable joints

🔧 Technical Details
* One-piece articulated structure
* Optimized joint spacing for smooth flexing
* Designed for FDM printers
* STL / 3MF files included
* AMS / MMU compatible
* Scales well (70–130% recommended depending on calibration)

⚠ FlexiMania Notice
This model is priced higher individually on purpose.
Full access to ALL FlexiMania designs + commercial license is more affordable with an active Patreon membership.
👉 patreon.com/c/FlexiMania_

📜 License
Personal use only.
Selling printed models or redistributing digital files is NOT allowed without an active commercial license.
To legally sell prints, you must have an active Patreon commercial membership.

💡 Pro Tips
* Looks amazing in blue / teal / gradient filament
* Long neck creates a very satisfying flex motion
* Great for multicolor head or eyes
* Works best at 100–120% scale

3D printing settings

  • Supports: NO

  • Material: PLA recommended

  • Layer height: 0.2 mm

  • Walls: 3 walls

  • Infill: 10–15% (Gyroid recommended)

  • Adhesion: Skirt recommended

  • Print type: Print-in-place (do not separate parts)

  • After printing: gently flex segments to fully loosen articulation

Tags