Bracelet Holder with Tray
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Bracelet holder with tray
- Rating
- 0 / 5
- Likes
- 17
- Downloads
- 62
- Makes
- 0
- Views
- 337
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Women
- License
- Creative Commons — Attribution — Noncommercial
Parts
Feet need to be printed from TPU, but are optional and could be replaced by a cut-out from foamed rubber or simillar material to create grip.
Weighing down
The Bracelett Holder is designed to have some space between the backplate and the bowl. By filling this space with some heavier materials you can weigh down the holder. To better print the bowl supports will be required.
BOM
4x M3 Threaded Insert
1x M4 Threaded Insert
4x M3x5mm Cylindrical Head Screw
1x M4x10mm Cylindrical Head Screw
Weights (optional)
Foamed Rubber or simillar (if you cannot use TPU)
Assembly
Insert all the threaded inserts in the associated bores:
Screw together the arm and the bowl by using the M4 screw:
Screw together the plate and the bowl by using the 4 M3 screws (add some weights at this point):
Glue together the holders and the arm as well as the feet and the plate:
If you dont want to print the feet from TPU but rather cut them out of another material use the following drawing to get the right dimensions:
Alternative Version:
The alternative version has slimmer holders and requires you to also print a slighty adjusted arm. All the other parts will be the same.
To assemble follow the instructions above.