1 / 1
Laser Focus Tool - 10mm
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
10mm centred Laser focus tool, for my Omtech K40+. There are marked steps up or down from centre, to cut/etch/fill.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 11
- Makes
- 0
- Views
- 75
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Most of the laser focus tools are centred around shorter gaps from the lens to the object.
For my Omtech K40+, its 50.8mm lens system requires a 10mm spacer after the lens. This spacer centres 10mm (for fine detail/engraving), or above for area fill / soft etch, or below for thicker cutting.
I printed mine in PLA, and then used a contrasting color for the nubmers on the top layer. The numbers would likely print clearer if you used a smaller nozzle than the 0.4mm that I used.