x2Dhaust - X2D Exhaust & poop extension
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Custom Exhaust Extension for Bambu Lab X2D - poopchute extension included
- Rating
- 0 / 5
- Likes
- 12
- Downloads
- 74
- Makes
- 0
- Views
- 1,719
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Bambu Lab Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Custom Exhaust Extension for Bambu Lab X2D
Please use v3
EDIT: I received feedback that the ejection is not working properly. Based on my observations, the X2D occasionally produces longer strands during ejection. To prevent clogging, the only solution was to increase the angle and widen the channel. I have slightly adjusted the design accordingly, also reducing material usage a bit. In my own testing, ejection with longer strands is no longer an issue.
WARNING! Due to the increased incline, it is no longer possible to keep the entire lower air duct completely clear. The restriction is minor, but everyone should be aware of it individually.
I designed this exhaust extension to solve a persistent smell issue. Even with an additional fan already installed, the stock filtration wasn't enough to eliminate odors completely.
Drawing from my experience with a carbon filter setup on my X1C, I created this adapter to allow the connection of a more powerful external fan system.
Used 2 M3 Screws for the aligner. No extra threading or tapping needed—you can just screw them directly into the existing holes.
[EDIT: Forgot to mention: For easy installation and removal, I used 10 round neodymium magnets (10mm diameter, 2–3 mm thick) embedded in the recesses. This makes mounting super quick and tool-free.]
Key Features:
Improved Airflow: Specifically designed because the standard cooling/filtration wasn't sufficient.
External Connectivity: Perfect for venting fumes outside or through a larger secondary filter.
Compatibility: Designed to work alongside a future "poop chute," so it won't interfere with your printer's waste management.
If you're still smelling fumes during your prints, this upgrade is for you!
[EDIT 2: The poop chute extension is coming next. This is Version 1, currently in a test print today—images will follow soon.
The printer’s ventilation slots are fully kept clear, and the chute has a 20° incline. I’m hoping that’s sufficient to reliably guide the waste all the way to the front.
This version is quite compact, with a width of only 3 cm. The first 0.5 mm (2–3 layers) of the front section are printed in transparent PLA so you can easily see the fill level. (alternative print the left side transparent)
The front part can be removed upwards for easy emptying. This design is intended for occasional multi-color or multi-material prints, with a focus on using both nozzles efficiently while minimizing waste.]