1 / 1
Handle for maintenance hatch on INBXX
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A handle to put in the hole on the maintenance hatche(s) on the INBXX
- Rating
- 5 / 5
- Likes
- 19
- Downloads
- 132
- Makes
- 16
- Views
- 311
- Reviews
- 15
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Share Alike
This is a small handle to replace the hole(s) in the INBXX maintenance hatch to make opening the hatche(s) easier and seal up the hole(s) if using the Semi-smart heater.
Tested in ASA with 0.4 mm nozzle, but should work just as well in PETG. The heatset insert version uses M3x4mm inserts, the other versions can be screwed into directly (but does probably require self-tapping screws).
The OpenSCAD source is available (mostly hand written, but some AI-assistance to add in the chamfering), feel free to modify and generate your own versions.