1 / 5
FlashForge Adventurer 5M/5M PRO HGX 2.0 (ONLY) Lightweight Extruder
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Now you REALLY don't need to grind anything :P But you'll have to print one gear out of nylon(PA) or POM
- Rating
- 0 / 5
- Likes
- 9
- Downloads
- 50
- Makes
- 0
- Views
- 486
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Ok this time you don't need to grind anything, but you need to print one gear out of PA or POM with 0.2 (0.25) nozzle. That's important because you need 2 lines on the gear teeth.
What you'll need:
m3x12 screw(from original extruder)
m3x14 screw
m3 heat insert
Print in ABS GF with 0.4 nozzle
Use the printed 2 parts of degearing jig to separate metal wheel from the pom gear





Then push the metal wheel on the printed gear

and now you have new gear :P

Assemble the extruder like this

