1 / 2
Gourmia GF858 Klipper Annealing Oven — image 1
1 / 2

Gourmia GF858 Klipper Annealing Oven

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

This is an enclosure for electronics when turning your Gourmia GF858 into a klipperized annealing oven.

Rating
0 / 5
Likes
3
Downloads
2
Makes
0
Views
211
Reviews
0

Updated at source:

Model information

Category
Kitchen
License
Creative Commons — Attribution

This is an electronics enclosure I made for my Gourmia GF858 air-fryer.  It is modeled in fusion360 by tracing the original lid.  As such, it fits exactly like the original lid, but without the tabs that secure it.  The holes in the bottom of the enclosure are for bolts that you will secure to heat-set inserts you put in the top of the interior of the air-fryer.  The holes are are spaced for my hack-job of a hole-drilling and are arbitrary.  You can remix this and change the holes to where your going to place yours.  I recommend placing it on-top of the de-lidded Gourmia, then drilling through the enclosure+ABS plastic of the Gourmia in one go.  That way you have your holes completely aligned.  Go slow, and with light pressure, or youl mess up your holes and make them wonky like I did.

The lid is secured via bolts into heat-set inserts you will place in the top of the housing. 

I have also included the simple bracket I made to fit a BTT mini12864 V2 display. 

All heat-set inserts holes are sized for voron spec heat-sets.

The din-rails are simply cut how you want, then secured with an appropriately sized bolt through a plastic drilled hole.  I used M5 fasteners I had.

I have used this model successfully several times now.  I recommend printing it out of ABS.  The housing of the Gourmia is ABS anyway. It does not get warm, even after 8+ hours of annealing. There is an access hole for wires to pass from the enclosure to the fryer components.  

I will not detail the wiring step for fear of being on the hook for someone doing something dumb and dangerous.  If you are not comfortable with AC wiring, or wiring up heating elements, DO NOT mess with your air-fryer.  Anything you undertake using these models is your own business and at your own risk. 

ALSO--------> IMPORTANT------> tell your cat i said HI.