1 / 2
XL Enclosure Adapter (M3 Screws)
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Universal spoolholder adapter that allows M3 screws to be used as turn-prevention on an XL with enclosure.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 15
- Makes
- 0
- Views
- 126
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Open Community License v1
Use 1 or 2 M3 hex socket head cap screws to prevent the universal spool holder from turning. (see images)
The tolerances are very tight, after adding the screws, check if the adapter will stay flat on the puck.
Make sure the extended side is away from the draft shield
Good way to use up tiny m3 screws :)
I added the step file, so you can adapt the model to your needs.
Changes:
Extended the base plate to allow M3 Screws to be used to prevent turning.
Increased thickness by 0.8mm