1 / 2
Stands for Presonus Eris 3.5
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Stylish stands for your Presonus Eris 3.5 studio monitors.
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 12
- Makes
- 0
- Views
- 85
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Audio
- License
- Standard Digital File License
Stands for Presonus Eris 3.5 / by: Xetr's Studio
Printed on: Elegoo Centauri Carbon
Print time: About 6-8h
< Instructions - Process settings >
Material: PLA, PETG, ABS (I used PLA from Creality)
Layer height: 0.16mm
Nozzle: 0.4mm
Infill: 10% (Pattern: Gyroid)
Wall loops: 3
Top/Bottom shell layers: 3
Seam position: Aligned
Brim type: Mouse ear
< Instructions - Support (ElegooSlicer) >
Step 1:
Support type: Manual Normal - grid
Step 2:
Support painting -> Fill -> Smart fill angle = 20.00 -> Click on the circled areas
Step 3:
Slice plate
< Post-printing process >
Remove all supports
Use a sharp blade to remove any remaining support material from the edges
ALL DONE! :>