1 / 4
Prusa XL - EnXLosure Mod for a heated chamber — image 1
1 / 4

Prusa XL - EnXLosure Mod for a heated chamber

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

The modification is for the Prusa XL EnXLosure by Voxel3D and equips the XL with a chamber heater.

Rating
0 / 5
Likes
12
Downloads
13
Makes
0
Views
333
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial

===== Update 4 - 26.08.2026 =====

Here’s the fourth and final update on my Prusa XL heated chamber EnXLosure mod.

Current Status

Version 3 of the model is now available and the project is officially completed.

After several successful prints, the chamber heater has been running reliably without any issues so far.

Version 3

  • Several small adjustments and simplifications have been made.

  • The biggest change is the cable feed-through, which has been redesigned and simplified.

  • The additional separate part used in the previous version is no longer required.

Filament Recommendation

Since the enclosure is designed to operate at elevated chamber temperatures, please use a filament that can withstand the expected temperatures.

  • I chose ABS-CF for my enclosure.

  • The material has performed well during testing at chamber temperatures of up to 50°C.

  • According to the manufacturer's specifications, the filament has a heat resistance of up to 90°C.

  • ABS-CF filament used for the project:
    https://amzn.eu/d/0bcQLFDx

Bill of Materials (BOM)

I have added a BOM for the required screws and hardware.

Please note that tolerances and hole dimensions for the heat-set inserts and nuts should be checked before printing. Depending on the filament, printer, and printing settings, the required dimensions may need to be adjusted.

Screws
  • M3x12 – 10 pcs
    For attaching the completed enclosure assembly to the printer.

  • M3x8 – 20 pcs
    For connecting the panels to the frame parts.

  • M3x16 – 4 pcs
    For mounting the 3 cable holders, the 3 heater holders on the left side (outside view), and the holder on the upper right side (outside view).

  • M3x16 – 2 pcs
    For the two cable clamps on the left side (outside view).

  • M3x12 – 3 pcs
    For mounting the chamber heater.

Additional Hardware
  • M3 nuts – 6 pcs

  • M3 washers – 25 pcs

  • Heat-set inserts – 20 pcs

Print Settings

The following print settings were used for the enclosure parts:

  • Perimeters: 5

  • Top Layers: 5

  • Bottom Layers: 5

  • Infill: 40%

  • Supports: Yes

  • Support Type: Organic

I initially experienced some warping issues with the larger parts. If necessary, I recommend using a brim combined with mouse ears and glue on the print bed to improve bed adhesion and reduce warping.

Project Completed

The project is now officially completed.

The chamber heater has been running reliably in my enclosure without any issues so far, including during multiple prints and tests at elevated chamber temperatures.

I will continue to use and monitor the enclosure, but no further major changes are currently planned.

===== Update 3 - 03.06.2026 =====

Here’s the third update on my Prusa XL heated chamber EnXLosure mod.

Current Status

After several successful prints, I can confirm that the chamber heater has significantly improved the enclosure's performance.

Heating System

  • The Creality chamber heater continues to perform very well.

  • The chamber now reaches its target temperature significantly faster and is able to maintain stable temperatures even in cooler ambient conditions.

  • During testing, chamber temperatures of up to 50°C were achieved.

XL Upgrades / Mods

To improve reliability and thermal performance, I have integrated several additional modifications into the printer:

Documentation

  • I am currently preparing a BOM that will include all required screws, fasteners, and additional hardware needed for the enclosure.

  • This will be uploaded together with the final files to make assembly as straightforward as possible.

What’s Next?

More photos and test results coming soon.

The BOM will be uploaded shortly.

===== Update 2 - 06.05.2026 =====

Here’s the second update on my Prusa XL heated chamber EnXLosure mod.

Current Status

  • The project is almost finished. Only a few minor (mostly cosmetic) improvements are still pending.

  • Current version V2 is uploaded.

Heating System

  • I have successfully integrated the Creality chamber heater into the enclosure.

  • The system has been tested up to 45°C chamber temperature The used ABS-CF components withstand the heat without issues.

  • The results are very promising: The chamber heats up significantly faster Higher and more stable temperatures can be reached compared to previous iterations

XL Upgrades / Mods

  • Most of the previously used PETG parts have now been replaced with PC-CF components to improve heat resistance and overall durability.

  • The remaining parts will be upgraded over the next few weeks.

  • Once completed, I will upload all updated STL files here.

Electronics Cooling

  • The heatbed controller has been upgraded with active fan cooling, improving thermal stability and reliability during longer prints.

What’s Next?

  • More photos coming soon.

  • Updated STL files will be uploaded shortly.

===== Update 1 - 21.04.2026 =====

Here’s the first update on my Prusa XL heated chamber EnXLosure mod.

Heating System

  • For some time, I have been considering adding an affordable chamber heater to my Prusa XL.

  • The goal is to quickly reach chamber temperatures of up to 50°C and improve printing performance with temperature-sensitive materials.

  • After comparing different options, I decided to use the Creality Chamber Heater, which is available on AliExpress starting at around $70.

  • According to the specifications, the heater supports chamber temperatures between 45°C and 70°C, making it more than suitable for the intended operating range.

First Tests

  • Initial tests have been very promising and showed a significant reduction in chamber heating time.

  • To integrate the heater, the lower right acrylic panel will be replaced by a custom mounting solution designed specifically for this enclosure.

Current Status

  • This modification is currently in the prototype stage, and the first ABS-CF test print is already running.

  • More details, test results, photos, and STL files will follow as development progresses.

Tags