Carvera Air Centering Fixture "Grippy"
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Prototype for CNC project which works for building the same CNC project.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 5
- Makes
- 0
- Views
- 50
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial
This is an adaption inspired by:
&
I'm not labeling as a remix because I didn't use their models, but rather used theirs as inspiration for my own bottom up design. Not sure if this is a correct label, but there is the logic.
The different form factor from their design is to center the chuck (ArtyMaster 2 inch Mini 3-Jaw Self-center woodworking chuck. M18X1.5mm Thread and 0.4 inch connector Mini lathe Chuck) in the center of the securing points using the anchor 1 or 2 points so I can use the anchor 1 or 2 origin as my datum. In my head this works better for me to set up my projects. I am using the STL to make cuts on an aluminum block which will eventually become the final design, but in the interim I can use it build the metal fixture and other projects.
For the PLA version posted here, I printed the model with threads and then used the ArtyMaster 2 as a die (as in tap and die) to make the printed threads match the chuck. Treat it like any other die. Slowly thread a bit, back off then advance incrementally. Significant hand torque is required, but eventually it nests quite nicely on the model.
Finally the moniker "Grippy" is a nod to a Megan E. O'Keefe character from The Protectorate series. Because Grippy is awesome, as are the books.