Stained Glass Dragonfly - Bambu AMS (RYB)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is another in a series of color mix experiments with translucent filament. This uses red, yellow, and blue…
- Rating
- 0 / 5
- Likes
- 10
- Downloads
- 25
- Makes
- 0
- Views
- 87
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- 2D Plates & Logos
- License
- Creative Commons — Attribution — Share Alike
This is another in a series of color mix experiments with translucent filament. This uses red, yellow, and blue translucent colors to build up the layers to make all the color variations.
I used Inkscape to convert the line drawing to a dxf and imported it to Solidworks. Each section was independently extruded and layered to make the color composition.
All of these mixed layer prints will give a warning about floating objects in Bambu Studio. It is because the various layers are supported by other colors underneath them, but all the layers have floating objects.
I used Sunlu Red and Blue Translucent PLA and JAYO Yellow translucent PLA for this print.
I included the Bambu 3mf file. It is set or the version with the yellow background. I switched blue and yellow in the AMS to make the second version.
Category: 2D Art