1 / 1
High Detail Spooky Tree - REMIX
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I used meshlab to check the mesh and reduce the faces. I cut it down by half. I used netfabb basic to cut the bottom…
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 10
- Makes
- 0
- Views
- 49
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Gadgets
- License
- Creative Commons — Attribution
I used meshlab to check the mesh and reduce the faces. I cut it down by half. I used netfabb basic to cut the bottom flat.
It's a neat model with good potential for miniature terrain. The model is just over 120mm tall and http://gcode.ws/ estimates about 4.5 hours to print at 0.2 Layers, 20% infill and wall width of 5.
Category: Models