Shaper Bench Pilot MFT Foot
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Foot to screw a Shaper BenchPilot to a MFT3 table or MFT-style tabletop
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 15
- Makes
- 0
- Views
- 143
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
When working on long pieces, the 20mm frame is limiting the thickness of the pieces.
With 4 feet like these, we can use the MFT table as the frame.
Installation
make sure the locking pins from the left and right arms are in place before moving the assembly to prevent misalignment.
screw the feet to the Bench Pilot arms
slide them on the MFT
lightly screw the long M6 bolt.
Parts from McMaster
12x 90591A151 Steel Hex Nut, Class 8, M6 x 1 mm Thread,
4x 91290A332 Steel Socket Head Screw, M6 x 1 mm Thread, 30 mm Long
The feet can be used with the existing frame and its own feet, but the arms are ~8cm farther back.