Vector Optics Sentinel X-Pro 10-40x50 Magnification Lever
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Couldn't find a suitable Mag Lever to use on the Sentinel. Continentals have a different tooth pattern. So I made one.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 28
- Makes
- 0
- Views
- 86
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution
After searching and trying many other models for Continental or Veyron model scopes, they just never sat right. The knurling pattern used on the Sentinel is different and so the ring always sat on top of some teeth.
After a few versions and a lot of PETG I found the right cadence, depth and width matching the Sentinels design and have a perfect fit.
Prints on its side, you could add fuzzy skin if you want if you have a patterned plate.
Would suggest a high wall count for strength.
No supports needed.
You will need:
PETG - for heat resistance, flex and durability.
1x M3 x 8mm Bolt
1x M3 Nut
Any questions, feel free to ask.
Happy Shooting!