Voron 2.4 Bondtech INDX front adapter
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
adapter for INDX toolheads on the front, you can place up to 9 tools on the 1515 extrusion.
- Rating
- 5 / 5
- Likes
- 85
- Downloads
- 131
- Makes
- 1
- Views
- 3,804
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Voron Parts & Upgrades
- License
- GNU General Public License v3.0
I created this model because I have CNC gantry parts and don't want to lose them. Additionally, this adapter doesn't require the removal of any parts; just unscrew the Z-belts, feed them through the adapter, and re-tighten them.
What you need:
DoorBuffer mod to get some of the lost build area back
6x M3x8 screws
4x M3 Inserts
6x M3X10 screws
4x M3x16 screws
6x M3 hex nuts
4x M3 T-nuts (for 2020 profile)
1515 Extrusion 400/350/300mm
Note: Any cable chains on the Y-axis will collide with the adapter. Therefore, I recommend moving the X and Y endstops to different locations (there are many mods available for this).
V2.0: Added clearance for reaching the hexnut of the belt tensioner top part
V3.0: Shortened the Adapter after the toolhead was not able to reach the tools
This is V2.0, so feel free to comment if you encounter any problems or have feedback!