Brake for swivel chair - won't move
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Brake for swivel chair - won't move
- Rating
- 5 / 5
- Likes
- 72
- Downloads
- 158
- Makes
- 1
- Views
- 639
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Office
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Hello,
I have a brake for a swivel chair for you - it won't move.
It's for a swivel chair for the office or living room.
It's for a wheel size of 60x60mm, so you can enlarge / reduce it as needed.
Suitable for a racing simulator or a gaming steering wheel.
I have it as an example for the G29 set :-).
Good luck with the printing!
I used PLA/PETG as the material.
You need to use supports!!!
If you are interested in my work, the links are here:
https://www.instagram.com/ainon3dprint/
https://www.tiktok.com/@ainon3dprint?_r=1&_t=ZN-959SB9FLNJu
If you would like to support me financially, please do so here:
https://www.patreon.com/Ainon3Dprint
My work will always be free for everyone!