[WIP] NFHK Oculink 8i To PCI Express 4.0 x16 eGPU Enclosure
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
eGPU Enclosure for the NFHK Oculink 8i To PCI Express 4.0 x16 Adapter
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 64
- Makes
- 0
- Views
- 566
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Public Domain
!! WORK IN PROGRESS !!
I haven't been able to run a test print of this yet due to a clog in my print nozzle. Tolerances have been accounted for but not yet tested. Please be aware parts may not fit well until I've been able to test it myself. This revision is being published for volunteers to print some initial tests on their own if they're eager to test things out before I can go through full quality-control and finish some additional components (like outer shells and PCI slot covers).
Working with the Framework community to design a case/enclosure for eGPUs using the NFHK Oculink 8i To PCI Express 4.0 x16 Adapter from AliExpress/Amazon:
AliExpress: https://www.aliexpress.us/item/3256809000385961.html
Amazon: https://www.amazon.com/dp/B0BZKCJVLG
In the Oculink Expansion Bay Module thread, we're comparing dimensional variance of the NFHK Oculink adapter found at the links above. We have already determined that at least 2 versions of the board are in the wild; "V1.0" and "V2.0". This design accounts for either board revision; you need only use the appropriate locations for motherboard standoffs for whichever board you have.
This was initially intended to pair with the Oculink x8 expansion board Filip developed for the Framework 16 laptop series, but now may also be a good fit for the upcoming Framework Oculink Dev Kit when it is released.
Print only with PETG, ASA, ABS, or other heat-resistant materials. Print in the orientation that the parts load into your slicer. All parts are designed to be printed without supports. I recommend 3+ walls and 20% infill to increase rigidity.
SFX PSU Adapter and Flex ATX PSU Adapter only need to be printed if you intend to use a PSU in one of those form factors; mounting them will require additional screws as called out below.
This model requires the following items to assemble:
Qty 18 ATX Motherboard Screws (or similar - #6-32 or 3mm thread)
+ 3 screws for SFX PSU or
+ 3-5 screws for Flex ATX PSU
Qty 14 Hex Nuts (#6-32 or 3mm thread, match screws)
+ 4 nuts for SFX PSU or Flex PSU
Qty 6 ATX 1/4“ or 6mm Motherboard Standoffs (#6-32 or 3mm thread, match screws)
