VESC mounts for Lenco front box
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Brackets to use the Lenco front box with either a 100a 100V Spintend or a Enoid MK8 (not the pro).
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 3
- Makes
- 0
- Views
- 22
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Share Alike
If you want to use your Lenco front box with something other then a Spintend UBOX 250A (no mods needed for that), you can print these brackets to fit either a Spintend 100V 100A or an Enoid MK8 (not the pro). This also makes room to fit a splitpack battery design. If you want high power split pack and light, I recommend the MK8. You can buy this with the integrated LCM to make light easier. Feel free to mod but please post your mods so we can all profit.
Print in something high temp. at least PETG. Make it as strong as you can. I also recommend using thermal paste between the VESC and the box.