1 / 5
Ember Arknights: endfield
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
EMBER from arknights endfield figure
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 76
- Makes
- 0
- Views
- 432
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Video Games
- License
- Creative Commons — Attribution — Noncommercial
3D Printing Settings:
Technology: FDM/FFF
Layer height: 0.2 mm
Infill: 15–20% (Gyroid or Cubic recommended)
Walls: 3–4
Supports: Yes (weapons, hair, and extended parts)
Material: PLA recommended for easy printing and fine detail
3D Printing Settings (Resin):
Technology: SLA/DLP/MSLA
Layer height: 0.03–0.05 mm
Infill: Solid (100%)
Walls: Not required (solid print)
Supports: Yes (weapons, hair, and extended parts)
Material: Standard resin