1 / 6
Paper Block Desk Organizer — Sticky-Note Tray + Pen/Scissor Column + Slot — image 1
1 / 6

Paper Block Desk Organizer — Sticky-Note Tray + Pen/Scissor Column + Slot

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Three-zone desk organizer: thin slot for a phone or notebook on the left

Rating
0 / 5
Likes
0
Downloads
4
Makes
0
Views
41
Reviews
0

Updated at source:

Model information

Category
Organizers
License
Creative Commons — Attribution

A monolithic desk organizer that handles three things at once:

  • Left zone — thin vertical slot, open on top + front + back. Drop in a phone, a slim notebook, a stack of business cards, a menu card.

  • Middle zone — paper-pad well sized for a 90 × 90 mm sticky-note cube. Tall back wall keeps the pad upright; sides slope from the back down to a low front lip; the front lip is split in the middle so your thumbs reach in to grab a sheet from the front.

  • Right zone — solid column with deep round holes for pens / pencils / markers and one elongated slot for scissors (tips down). The front face has a pencil icon inlay; the right face has a scissors icon inlay — both two-color drop-in inserts.

Three STL files for two-color AMS printing:

  • paper_block_organizer_body.stl — main body, drilled holes + icon recesses (filament A — blue in the photos)

  • paper_block_organizer_pencil_inlay.stl — pencil silhouette that drops flush into the front face (filament B — black in the photos)

  • paper_block_organizer_scissors_inlay.stl — scissor silhouette that drops flush into the right face (filament B)

Assembly in Bambu Studio:

  1. Import all three STLs as a single combined object (concatenate them into one ASCII STL or use Import → right-click → "Split to Parts" on the bundled file). Coordinates are already locked — the inlays land precisely in their recesses.

  2. Assign filament 1 (body color) to the body, filament 2 (icon color) to both inlays.

  3. Print flat on the bed, all wells facing up. No supports — every overhang is < 45°.

Single-color printing works too — just print the body alone. The icon recesses read as engravings without inlay fill.

Prints flat on the bed, ~90 × 230 × 75 mm, ~5 h on a Bambu P2S in PLA at 0.2 mm.

Tags