Dräger AirBoss Cap
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.31 – €0.38 net (excluding VAT)
For file: Endcap_0.4n_0.2mm_PLA_MK4S_19m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.35 excluding VAT (range midpoint).
- Weight reported by the author
- 5 g
- Print time reported by the author
- 19.2 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Dies ist eine Abdeckkappe / Schutzkappe für den Flaschenanschluss eines Atemschutzgeräts.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 11
- Makes
- 0
- Views
- 93
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution — Share Alike
Empfohlene Druckeinstellungen
Einstellung | Empfehlung |
|---|---|
Filament | PLA |
Düse | 0,4 mm |
Layerhöhe | 0,2 mm |
Infill | 20–30 % |
Wandstärke | 1,2–1,6 mm |
Perimeter/Wände | 3–4 Wände |
Top/Bottom Layers | 4–5 Schichten |
Supports | Nicht erforderlich |
Brim/Rand | Normalerweise nicht erforderlich |
Druckbett-Temperatur PLA | ca. 60 °C |
Düsentemperatur PLA | ca. 210–225 °C |