TriWay trimmer inserts - 7 PRC, 300 PRC, 6.5 Creedmoor
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Inserts for the Giraud tri-way trimmer to accept 7PRC, 300PRC, and 6.5 CM cases. parametric FreeCad file also included
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 12
- Makes
- 0
- Views
- 144
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Inserts for the Giraud tri-way trimmer to accept 7PRC, 300PRC, and 6.5 CM cases. parametric FreeCad file also included which can be easily modified with other case dimensions. Can be used with any Giraud tri-way trimmer by removing the included insert - there's a retention ring inside that needs to be removed before the new insert can be used. In theory, if you're trimming cases to SAAMI specs you shouldn't need to adjust the cutter height between cartridges as measurements are measured off the end of the case, but it will depend on shoulder bump and I recommend verifying this. To create new inserts, go to the spreadsheet and edit the second block of numbers which are the case specifications. I added some notes to hopefully make it clear what each measurement is.