Nerf Rival Nemesis Switch Plates (Rev + Fire)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Mounting brackets that allow for straightforward installation of upgraded lever microswitches in the Nerf Rival Nemesis.
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 33
- Makes
- 0
- Views
- 120
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Toys
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
The Nemesis Switch Plates, designed by Luke, are 3D-printed mounting brackets that allow for straightforward installation of upgraded lever microswitches. Designed for 21A Omron switches, these switch plates should also work with any long lever 15/16/21A microswitch.
There are two 3D-printed parts: one to hold the switch and one to attach to the sliding REV trigger as an extension. Both hold with friction fit but should be glued in place. Glue can be Superglue/CA, Epoxy, Hot Glue, Crazy Glue, Goop, etc. This involves minimal cutting or dremelling to fit, but it's very easy! This saves a lot of putty cost, work, and time! Compatible with all long lever switches in my shop.
FEATURES:
• Nemesis Switch Plates
• Custom-fit 3D-printed brackets
• Ideal switch placement upgraded switches
• Quick and easy install!
• Friction fit + secured with glue!
• Designed for the Nerf Rival Nemesis
INCLUDES:
• 1 Rev Switch mounting plate
• 1 Fire Switch mounting plate
• 2 Trigger extenders
FILES INCLUDED:
• 1 Bambu Studio 3MF File with saved print settings
RECOMMENDED PRINT SETTINGS:
• Quality: No scarf seams or joints
• Strength: 3 wall loops; 20% sparse infill
• Supports: No-brim